Setting Up Telanophy Network Protocols - NEC Xen IPK Installation Manual

June 2004
S 6
E C T I O N
S
ETTING UP
T LAN
E OPHY
NETWORK PROTOCOLS
76 - Chapter 6
TeLANophy workstations can use TCP/IP as the communications protocol.
TeLANophy uses TCP port 1024. You need to know the TCP/UDP port to
allow access through a firewall.
Refer to the following sections to install and set up the TCP/IP protocol, and
to use TeLANophy applications over wide area networks (WANs) and the
Internet.
• To set up TCP/IP workstation, see "TeLANophy workstation installation over-
view," on page 81.
• To use TeLANophy applications over a WAN or the Internet with TCP/IP, see
"Using TeLANophy applications with WANs and the Internet" on page 84.
See Also:
OS/2 Warp documentation
NEC Business Solutions Ltd
Setting Up TeLANophy