4-3. Setting the 8G FC Switch
To use the 8G FC Switch, the following information must be set.
Password
Switch name
Port data rate (required)
Port topology (required)
ISL R_RDY Mode (required ports cascaded)
Domain ID
Checking / Setting Principal Selection Mode
Zoning (required)
Time and time server
Saving setting values
NOTE:
See "Appendix Device Setting Features" for how to use the features.
Notes on settings
If one or more setting items required for the 8G FC Switch is set incorrectly, a
system fault may occur. Before executing a job, you should be familiar with its
feature and influence sufficiently.
CAUTION
- 138 -