NEC 2400 Integration Manual page 119

Table A-1. SID Error Codes and Descriptions
Code Description
1 VM Comm Error
2 No Free VM_IN Packets
3 Excess Data -- VM_IN Pkts
5 Bad MWI Pkt
6 No Free Centrex Pkts
10 Excess Data - PBX_IN pkt
11 Kernel Error
12 No Free PBX_OUT Packets
13 Idle Task Not Enough Time
15 Bad PBX Pkts > 50%
16 Bad PBX Pkts > 5%
17 System Startup
19 System Powerdown
20 VM Comm Error > 5%
21 VM Comm Error > 50%
22 Boot Error: RTC
23 Boot Error: SCC
24 Boot Error: LED
25 Boot Error: Modem
26 Boot Error: DPRAM
27 Bad MWI Pkts > 50%
28 Bad MWI Pkts > 5%
29 PBX Comm Error > 5%
30 PBX Comm Error > 50%
31 Bad PBX Packet
32 Hardware Watchdog Reboot
33 Integration Stop
34 Integration Start
35 No Free PBX_IN Packets
36 Hardware Reset
37 VM Remote Reset
38 Software Reset
Type Action
W Check SMDI connection and parameters
W Check SMDI connection and parameters
W Check SMDI connection and parameters
W Check SMDI connection and parameters
W Check SMDI connection and parameters
W Check MCI connection and parameters
E
W Check MCI connection and parameters
W
I Check MCI connection and parameters
I Check MCI connection and parameters
I No action required
I No action required
E Check SMDI connection and parameters
E Check SMDI connection and parameters
E Set time and date
E
E
E
E
I Check SMDI connection and parameters
I Check SMDI connection and parameters
E Check MCI connection and parameters
E Check MCI connection and parameters
W Check MCI connection and parameters
E
I No action required
I No action required
W Check MCI connection and parameters
I No action required
I No action required
I No action required
Issue 2 December 1995
Error Logs
A-7