If you need more information for any of the screen fields or processes described
in this section, contact your switch administrator or consult the documentation
supplied with your switch.
Assign a Port for the Message Center
Interface Link
Use the instructions in this section to assign a port for the MCI link. Assigning a
port tells the switch the proper port to send information to the SID through the
MCI link.
1. At the Installation Commands menu, shown in Figure 7-6., enter 1 to select
the System Data option. After you press
Of Station Data screen as shown in Figure 7-8.
Assignment of System Data
SYS:
1
INDEX:
29
DATA:
Figure 7-8. Assignment of System Data Screen
2. Enter 1 in the SYS field to tell the switch that the parameter changes effect
the entire system.
3. Enter 29 in the INDEX field.
System data (SYS) 1 uses 255 indexes to control a variety of system
parameters. Index 29 controls the port assignment for the MCI link.
Configuring the Message Center Interface Link
SYS
02
TN
INDEX: System Data Index
DATA : System Data (Hexa-decimal)
you see the ASsignment
ENTER
: System Data Items
1-System Data 1
2-System Data 2
3-System Data 3
: Tenant Number
System
Index
1
0-255
2
0-15
3
0-31
Issue 2 December 1995
7-13