Start The Voice System; Turn On Transfer Feature - NEC 2400 Integration Manual

Installing SID Software on the INTUITY System

Start the Voice System

Restart the voice system for the INTUITY system to accept and process calls.
Use the following procedure to start the voice system.
1. Starting at the INTUITY Administration menu, select the following series of
menu options:
> Customer/Services Administration
> System Management
You see messages indicating that the voice system is being restarted.
When the process finishes, you see the following message:
2. Press
You see the System Control menu.
3. Press

Turn on Transfer Feature

After you install the NEAX software and restart the voice system, you need to turn
on the transfer feature in INTUITY AUDIX. For this procedure, see INTUITY
AUDIX Administration, 585-310-539, and set the transfer type field to basic .
5-8
Issue 2 December 1995
> System Control
>Start Voice System
Startup of the Voice System is complete
Press ENTER to continue...
.
ENTER
until you see the INTUITY Administration menu.
CANCEL