Edit Form Keys - NEC 2400 Integration Manual

In the example, you use the MCI form to set the baud rate for the MCI link. You
can set the baud rate to specific values between 300 and 9600 baud. On the
form you see a default value of 1200. To see the other options, you press the left
arrow key to decrease the baud rate or press the right arrow key to increase the
rate. When you find the rate you want, press
can recognize scroll item edit forms by the small arrow symbols (<- ->) shown
below the form name.

Edit Form Keys

Edit forms require you to enter data for SID setup and configuration. Most edit
forms have default values already entered on them. If you choose to use the
default value, press
the next or previous edit form, return to the main menu, or access a help screen.
Refer to the table below for a list of keys and the action each key performs.
Key
1,2,3,4,5,6,7,8,9,0
*,#
Func
Mode
Up Arrow
Down Arrow
Right Arrow
Left Arrow
Enter
With some menu selections, you can access multiple edit forms that link together.
When you access multiple edit forms, press
to move to the previous form.
The Switch Integration Device Software
to exit the form. As you edit forms, you can move to
FUNC
Action
Data entry keys
Data entry keys
Return to main menu
Help
Go to previous edit form
Go to next edit form
Get higher value
Get lower value
Confirm entry
to confirm your choice. You
ENTER
to move to the next form or press
Issue 2 December 1995
2-7