Stop The Voice System - NEC 2400 Integration Manual

Installing SID Software on the INTUITY System

Stop the Voice System

Before you can load the SID software, you must stop the voice system.
!
CAUTION:
All calls in progress will be disconnected.
Use the following procedure to stop the voice system.
1. Login as craft.
2. Press
You see the INTUITY Administration menu.
3. Select the following series of menu options:
> Customer/Services Administration
> System Management
After you select the last option, Stop Voice System, you receive the
following message:
4. Enter y to begin the process.
Before stopping the voice system, the system pauses until all calls in
progress disconnect. During the pause, you see a series of messages.
When all calls have disconnected, you receive the following message:
5. Press
The system returns you to the System Control menu.
6. Press
You are now ready to load the SID software, as described in the next
section.
5-2
Issue 2 December 1995
to accept the AT386 default.
ENTER
> System Control
>Stop Voice System
Enter y to continue, n to quit.
The Voice System has stopped
Press ENTER to continue...
.
ENTER
until you see the INTUITY Administration menu.
CANCEL