Create An Application - Siemens SINUMERIK 840D Operator's Manual

09.01
6.2

Create an application

Create/copy
application
Add to existing
project
Configure new
project
Create text for
application
Convert texts
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
6 Sequence for Configuring the MMC 100/HMI Embedded
++
Microsoft Visual C Workbench
1. TOOLS menu
2. "Application Manager"
3. Application New or Application Copy
++
Microsoft Visual C Workbench
1. TOOLS menu
2. "Installation Kit"
3. Project Management
4. Select project
5. Assign softkey
6. Define configuration (Create simulation environment)
++
Microsoft Visual C Workbench
1. TOOLS menu
2. "Installation Kit"
3. Project Management
4. New project
5. Assign softkey
6. Define configuration (Create simulation environment)
++
Microsoft Visual C Workbench
1. FILE menu
2. "open"
3. Open text file
4. Create texts
++
Microsoft Visual C Workbench
1. TOOLS menu
2. "Text conversion"
3. Set options for conversion
Introduction to Configuring (PSE)
PSE/6-33