First Changes To Application Configuration - Siemens SINUMERIK 840D Operator's Manual

Development Kit (EU)
3 First Steps in Configuring
3.2

First changes to application configuration

EU/3-22
•
Start Windows and the Visual C++ Workbench.
•
Select <Project> -> <Open> to open the project
L:\proj\app\obj_c800\app.mak.
•
Open the file app.c with the icon "Open a file of the current Project"
(top left, below the 'File' menu). Alternatively, without starting the
Workbench, open the file using a standard DOS editor.
•
Search for the character string "TEXT".
•
Duplicate the located line and modify the text object in the following
way:
"TEXT (101, X_T_APP, Y_T_APP+15, T_PJ_DUMMY, CS_SMALL,
0, WHITE)".
In doing this, you output the text "T_PJ_DUMMY" on the screen a
second time (displaced downward by 15 pixels).
•
Start the compilation for the application configuration with
<Project> -> <Build> APP.LIB
or by clicking the middle Build icon. Alternatively, initiate the
command "nmake" in the \proj\app catalog.
•
The compilation is successful if the following message appears in
the output window:
"APP.LIB - 0 error(s), 0 warning(s)"
•
Select <Project> -> <Open> to open the makefile
L:\proj\dat\makefile to link the binary configuration file proj.dat.
•
Start the linking process for the binary configuration file with
<Project> -> <Build> PROJ_DAT. Alternatively, initiate the
command "nmake" in the \proj catalog.
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01