Siemens SINUMERIK 840D Operator's Manual page 181

09.01
8.3 Input and output data
Task
Operating steps
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
1. The axis name, the current value and the unit of the first axis in the current
channel is to be shown in the first window.
The font is to be assigned double height and width.
2. In the second line, configure an input and output field that shows the
current value of R10 and is followed by the comment "R Parameter 10".
3. For every entry into the first window, R10 is to be initialized with the value
"123.456".
4. If the cursor is used in the input/output field for displaying R10, a text with
information is to be output in the status line.
•
Dynamic output fields are configured in the object list: Configuring Guide:
O_FIELD, IO_FIELD
•
The symbolic names of the NCK addresses are taken from "BTSS
Variables Help".
•
The position of the outputs is to be defined in their own header file (e.g.
APP_INCL.H). This file must be included in every application source file in
which these defines are used!
•
The following parameters for data conversion are used:
CON_STRING:
CON_DECIMAL (F_DOUBLE):
(see Configuring Guide: Data conversion)
•
Data initializations are generally configured in open lists.
Introduction to Configuring (PSE)
8 Examples
Axis name
Axis position, R parameter
PSE/8-53