Siemens SINUMERIK 840D Operator's Manual page 20

Operator's Guide (BA)
2 Control Panel
5
6
7
8
9
BA/2-12
Channel message line
1. Stop: No NC ready
2. Stop: No mode group ready
3. Stop: EMERGENCY STOP active
4. Stop: Alarm with stop active
5. Stop: M0/M1 active
6. Stop: Block in single block terminated
7. Stop: NC stop active
8. Wait: Read-in enable missing
9. Wait: Feed enable missing
10. Wait: Dwell time active
11. Wait: Aux. fct. acknowledgement missing (Aux. fct. = auxiliary
function)
12. Wait: Axis enable missing
13. Wait: Exact stop not reached
14. Wait: For positioning axis
15. Wait: For spindle
16. Wait: For other channel
17. Wait: Feed override at 0%
18. Stop: NC block error
19. Wait: For external NC block
20. Wait due to SYNACT instruction
21. Wait: Block search active
Alarm code display: display of the alarm number of the alarm which
occurred last. The symbol ↓ ↓ ↓ ↓ appears after the alarm number if several
alarms exist.
Dialog line: user prompting
Softkey bar with 5 softkeys.
Channel number
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01