Creating / Delivery Of The Application Configuration - Siemens SINUMERIK 840D Operator's Manual

Development Kit (EU)
5 Installation and Delivery of the Application Configuration
5.2

Creating / delivery of the application configuration

Objective
Requirements,
preparations
Procedure
EU/5-44
You intend to supply your customers with your application (and the OP
030 software) enabling them to perform a software update of their
OP 030.
The makedisk batch file included in the development kit generates
update disks including the setup and install procedures the customers
need for installation.
The update disks also comprise the mkalarm procedure for converting
and integrating customer-specific alarm texts.
•
You have installed an OP 030 environment on your PC with Setup.
•
Make sure that the setup_op.bat file is in the l:\ root directory. If
this is not the case, copy this from the installation disk (archive).
•
Your application configuration is located in L:\bin\proj.dat
•
Text changes have been made to all language directories
(d, g, e, f, i) under L:\proj\text\al and L:\proj\text\pj.
•
You have entered additional instructions for the user in
l:\readme.txt and info_oem.txt.
•
You require one blank formatted 1.44MB disk.
The software to be supplied is in the L:\vz_sys directories and copied
from there to disks.
The delivery contains the
- OP 030 base system
- proj.dat configuration
- Binary language files in 5 languages
- Alarm text source files in 5 languages as well as tools for
converting modified alarm texts
- System configuration files
- Setup / Install routines
- mkalarm (for conversion of alarm texts at the end customers)
Change to the substitute drive L:\ in the l:\instutlil catalog and start the
creation process with
"makedisk".
Follow the instructions for selecting the delivery components.
SINUMERIK 840D/810D Configuring the Operator Interface OP 030 (FBO) – 09.01 Edition
© Siemens AG, 2001. All Rights Reserved
09.01
▄