09.01
Tool
management
New tool
Delete tool
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
Tools can be created and deleted by pressing the "Management"
softkey.
Fig. 3-14
Tool management
Enter the new number and press the "OK" softkey to confirm.
Fig. 3-15
New tool
Enter the number to be deleted and press the "OK" softkey to confirm.
Fig. 3-16
Delete tool
Operator's Guide (BA)
3 Operation
BA/3-27