Change An Existing Window - Siemens SINUMERIK 840D Operator's Manual

Introduction to Configuring (PSE)
8 Examples
8.1

Change an existing window

8.1.1 MMC 100/HMI
Task
Overview
SOLUTION
Starting point
PSE/8-40
1. Replace the header text of one window in the application by another text.
2. Give a horizontal softkey the designation "Go to Win2".
Menu definition block
Window definition block
Softkey object list
SOB_WIN_1
Notes
•
The configuration texts can be found in the files
..\PROJ\APP\OEM_1\TEXT\D,G,...\OEM_1.TXT
•
When the texts have been changed, it is always necessary to carry out a
text converter run and for the application to be compiled.
•
The softkey designations can be found in the softkey object list.
Configuration Guide: SOFTKEY
Application: OEM_1
APP_MENU.C
#include "proj.h"
#include "mwl_app.h"
#include "OEM_1.h"
BEGIN_MENU (M_MENU_1)
M_CLEAR_BACKGROUND,
0,
W_WIN_1,
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
M_MENU
W_WIN_1
Object list Softkey reaction list
OB_WIN_1 SRC_WIN_1
/* clears menu area if
menu will be closed */
/* always '0' */
/* id of starting window */
© Siemens AG, 2001. All rights reserved
09.01
APP_MENU.C
APP_WIN_1.C