Siemens SINUMERIK 840D Operator's Manual page 173

09.01
8.1.2 OP 030
Task
Overview
SOLUTION
© Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
1. Replace the header text of one window in the application by another text.
2. Give a horizontal softkey the designation "Go to Win2".
Menu definition block
Window definition block
Softkey object list
SOB_WIN_1
Notes
•
The configuration texts can be found in the files
..\PROJ\APP\OEM_1\TEXT\D,G,...\OEM_1.TXT
•
When the texts have been changed, it is always necessary to carry out a
text converter run and for the application to be compiled.
•
The softkey designations can be found in the softkey object list.
Configuration Guide: SOFTKEY
Change header text of window
Microsoft Visual C++ Workbench.
1. Open OEM_1.txt file in the relevant language directory.
2. Replace the entry "T_APP_WIN_1HEADER" with "....".
3. Initiate the text converter run so that the change will be applied.
Give softkey designation
1. In the "APP_WIN.C" file, change the softkey designation in the softkey
object list
SOFTKEY(200,0,KEY_F1,2,NOT_PRESSED)
SOFTKEY(200,T_SK1H,KEY_F1,2,NOT_PRESSED)
2. Assign a text in the relevant text file OEM_1.txt to the symbolic softkey text
name:
e.g. T_SK1H "Go to Win2".
3. Initiate the text converter run, compile (everything), link.
Introduction to Configuring (PSE)
M_MENU
W_WIN_1
Object list Softkey reaction list
OB_WIN_1 SRC_WIN_1
in e.g.
8 Examples
APP_MENU.C
APP_WIN_1.C
PSE/8-45