Led 07: Off-Hook Call Announce (Oca) Automatic; Led 06: Automatic Busy Redial (Abr) Access; Led 05: Speed Dial; Led 03: Microphone Button On At Start Of Call - Toshiba Strata DK40 Programming Manual

Program 30 Station Class of Service

LED 07: Off-hook Call Announce (OCA) Automatic

When LED 07 is ON, a calling station has this feature enabled. If the system is ring first
(Program 10-1, LED10 ON) its user must dial 54 after hearing busy tone or 45 after hearing
ringback tone in order to OCA the called station. OCA Automatic only works on systems
with Voice First Signalling (Program 10-1 or 10-2, LED 01, OFF) in which case the user does
not have to dial 54 or 45. Initialised default: ON - all ports. The called station must also be
enabled to receive OCA

LED 06: Automatic Busy Redial (ABR) Access

ABR can be enabled (LED 06 ON) or disabled (LED 06 OFF) for each station. The system
selects the last line in the originating line group each time ABR is initiated
10-1). If you do not enable ABR access here, the ABR soft key does not appear on LCD
telephones. ABR operates when calling on digital lines but is not functional for analogue or
tie line calls. ABR overrides Program 41. Program 41 is normally used with Least Cost
Routing (LCR).
For the DK40, K5RCU must be installed to detect busy tone so that ABR will function.

LED 05: Speed Dial

Enables (LED 05 ON) or disables (LED 05 OFF) Speed Dial (Station and System). Initialised
default: ON - all ports.

LED 03: Microphone Button On at Start of Call

When enabled (LED 03 ON), the microphone and Mic button LED is turned ON at the start
of an on-hook speakerphone call. For this feature to work, you must enable the MIC button
lock operation (LED 02 ON).
When receiving internal DN calls, the flexible Microphone Cutoff (0LFURSKQ &XW0RII)
button (Program
Answerback.

LED 02: Mic Button - Locked/Momentary

You can turn an electronic or digital telephone microphone ON or OFF with the 0LF button
two ways:
With "Locked", (LED 02 ON), the 0LF button will be ON or OFF (depending on LED 03)
when you begin the call and you can alternately push it ON or OFF. This does not apply to
Handset OCA - which is 0LF push to talk only.
With "Momentary", (LED 02 OFF) the 0LF is always ON at the start of a speakerphone call;
you must continuously press 0LF to disable the microphone when talking on a speakerphone
call.

LED 01: Speakerphone

Enables (LED 01 ON) or disables (LED 01 OFF) speakerphone operation on any electronic
or digital telephone. If disabled, a speakerphone:
Strata DK40 Programming Manual Spring 1999
(see Program 31, LED
39) can control the microphone to prevent room monitoring and Handsfree
Will act as a handsfree electronic or digital telephone.
You can talk back with the receiver on-hook when receiving an internal call.
You can not talk on a call that you place or a call that you answer by pressing a
ringing button with the handset on-hook.
03).
System & Station
(see also Program
3-63