Led 05: Lcd Individual Message - Toshiba Strata DK40 Programming Manual

Program 35 Station Class of Service

LED 05: LCD Individual Message

This option defines which ports can allows LCD digital and electronic telephones to store up
to 10 personal messages. It offers the option of entering alphanumeric memos for each of the
LCD's station speed dial numbers. See the record sheet legend for the maximum stations that
can have this option:
A low port must be disabled (LED 05 OFF) before adding a port above the initialised ports.
LED 04: Message Waiting (RCV)
If the message waiting indication is not desired on an electronic, digital or standard
telephone, this program can be used to deny it. This does not affect that station's ability to
send a message waiting indication to another station ([PDN]). Do not use this option to
enable/disable MW lamps on standard telephones; use LED 03 below for standard
telephones.
LED 03:
Not used at this time.
LED 02: LCD Type 32/12
Digital and 6500-series LCD electronic telephones have 32-character displays. Therefore,
assignments should be left in the initialised state of 32 characters. LED 02 must be ON to
receive the voice mail message waiting indication.
LED 01: LCD Display
This option should be used (LED 01 ON) for all stations (even non-LCD), unless it is desired
to disable the station's LCD and message waiting functions.
Strata DK40 Programming Manual Spring 1999
System & Station
3-79