Program 09 Built-In Auto Attendant Prompt / Station Assignments; Program 09 Overview - Toshiba Strata DK40 Programming Manual

Program 09 Built-in Auto Attendant Prompt / Station Assignments

Program 09
Built-in Auto Attendant Prompt / Station
Assignments
Program Type:
Initialised Default:
(QWHU 3URJ 0RGH 0 6SNU
SELECT = Prompt
Press prompt number offered to caller.
First or second digit.
Dialled Digit (Menu Prompts)
0
1
1
1
2
1
3
4
5
6
7
8
9
1
Do not use digits 1, 2, and 3, unless the station numbering plan is changed. These numbers conflict with the
default station [PDNs] of the system.

Program 09 Overview

Program 09 tells the system where to direct calls after incoming Auto Attendant callers dial a
digit(s) in response to the menu of dialling prompts offered by one of the Auto Attendant's
digital announcers.
The exact dialling prompts along with their associated station numbers, [PDNs] and ACD
group numbers are assigned with this program. The actual announcements that are delivered
Strata DK40 Programming Manual Spring 1999
System and ACD
Initialised Data is Blank
3 < +ROG 0 6SNU
Processor
DK40
Station Number (PDN)
+ROG 0 6SNU & & +ROG
AUTO ATT DIAL = (1~4 digits)
Enter the station numbers, [PDNs], or #4 plus the ACD
Group No. which will receive Auto Attendant calls. Could be
* if establishing the first digit.
Press LED Button 01 to delete data.
ACD Group Numbers
01~08
Department, Division, Etc.
System & Station
0 6SNU & & +ROG
3-11