Program *63-2 Outdialling Inter Digit Pause - Toshiba Strata DK40 Programming Manual

Program *63-2 Outdialling Inter Digit Pause

Program *63-2
Outdialling Inter Digit Pause
Program Type:
Initialised Default:
(QWHU 3URJ 0RGH 0 6SNU
DATA = Duration of timeout. See legend below:
DATA
00
01
02
03
04
05
Program *63-2 Overview
The DK40 system will offer a system wide "inter Digit Pause" time-out facility. The DK40
will start the outgoing call setup process when this timer expires. Once the DKT/EKT/2 wire
extension has dialled a valid trunk access code, the "time-out" is started. After every dialled
digit the timer is restarted. If no digit is received from the extension and time-out expires, the
system considers the number dialled as complete and will start to route the call. Any further
digits received from the extension are ignored until a "connect" message is received from the
local exchange.
Note
Strata DK40 Programming Manual Spring 1999
System
04 (4 seconds)
9 6 +ROG 0 6SNU
*
Timeout Value
No Internal Sub-Addressing
01 Seconds
02 Seconds
03 Seconds
04 Seconds
05 Seconds
A very short time-out will require users to enter the dialled number very quickly and
delays by the user may result in calls failing due to "insufficient routing
information". A long time-out will increase outgoing call setup times.
5 0 +ROG 0
DATA
06
07
08
09
10
System & Station
6SNU & & +ROG 0 6SNU
Timeout Value
06 Seconds
07 Seconds
08 Seconds
09 Seconds
10 Seconds
& & +ROG
3-123