Program 30 Overview; Led 20: Dialled No & Sub Address Seperated By # From Standard Telephones - Toshiba Strata DK40 Programming Manual

System & Station
Feature
Dialled No. & Sub Address
seperated by # from a 2 wire
extension (LED ON)
Privacy Override
Executive Override
DND Override
Change TR Travelling Class Code
Change Verified Account Code
Verified Account Codes
Dial Pulse - DTMF OFF - TIE LINES
Change DISA Security Code
Change TR Override Code
Forced Account Code
OCA/Busy Override Automatic
(originating OCA)
ABR Access
Speed Dial Allowed
Microphone Button on at Start of
Call
MIC Button Locked
Speakerphone

Program 30 Overview

Program 30 enables or disables features for individual telephones at the station level. The
following text describes Program 30 LEDs.
LED 20: Dialled No & Sub Address Seperated by # from
standard telephones
This enables standard two wire devices to dial "Sub Addresses". The actual "dialled number"
and Sub Address can be seperated by dialling "#". If the LED is set to "ON" for the port
representing the standard two wire device will acknowledge the "#" as seperating the Dialled
Number and Sub Address information. If disabled (LED "OFF") when "#" is dialled, the
system will take no action.
3-60
0 0 0 0
1 1 1 1
LED 5 6 7 8
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
Strata DK40 Programming Manual Spring 1999
Program 30 Station Class of Service
Port
0 0 0 0 0
1 2 2 2 2
9 0 1 2 3
0 0 0 0 0
2 2 2 2 4
4 5 6 7 9