Siemens SINUMERIK 840Di Manual page 108

2 Hardware Descriptions
2.13 ADI4 (analog drive interface for 4 axes) (SW 09.01 and higher)
PROFIBUS DP
(X2)
PROFIBUS
address (S2)
2-108
Interface description of the PROFIBUS DP interface (X2)
S
Connection:
9-pin SUB-D socket connector
S
Pin assignment.
Table 2-26 Pin assignment: PROFIBUS DP (X2)
Pin Designation
1 –
2 –
3 RxD/TxD-P
4 RTS
5 DGND
6 VP
7 –
8 RxD/TxD-N
9 –
1) VO Voltage Output
O Output
B Bi-directional
S
Connector
– 6ES7 972-0BA41-0XA0; 35
tion socket
– 6ES7 972-0BB41-0XA0; 35
socket
– 6ES7 972-0BA12-0XA0; 90
tion socket
– 6ES7 972-0BB12-0XA0; 90
socket
S
Cables:
– 6XV1 830–0EH10; by the meter, non-trailable
– 6XV1 830–3EH10; by the meter, trailable
S
Further technical data
Maximum possible data transmission rate: 12 Mbps.
The PROFIBUS address of the ADI4 can be set in the range 1 to 127 using
switch S2.
Table 2-27 Meaning of switch S2
Switch Meaning
1 PROFIBUS address:
2 PROFIBUS address:
3 PROFIBUS address:
4 PROFIBUS address:
5 PROFIBUS address:
6 PROFIBUS address:
7 PROFIBUS address:
8 not used
1)
Type
– –
– –
B Receive/transmit data P (B line)
O Request to Send
VO Data reference potential (M5V)
VO Power supply voltage plus (P5V)
– –
B Receive/transmit data N (A line)
– –
0
angle for cable outlet, without PG connec-
0
angle for cable outlet, with PG connection
0
angle for cable outlet, without PG connec-
0
angle for cable outlet, with PG connection
0
2 = 1
1
2 = 2
2
2 = 4
3
2 = 8
4
2 = 16
5
2 = 32
6
2 = 64
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03
Function