Siemens SINUMERIK 840Di Manual page 461

Hide thumbs Also See for SINUMERIK 840Di:

Table of Contents

Operating actions

SINUMERIK 840Di Manual (HBI) – 06.03 Edition

Before you copy the software into the D:\Install directory make sure that suffi-

cient free memory space is available.

1. Power OFF the PCU.

2. Use a parallel data transfer cable (PC-Link or LapLink cable) to link the par-

allel port of the external PC (LPT1) with the parallel port of the PCU (LPT1).

3. Copy the software to be installed on the PCU into the directory C:\MMC102

(create it if it does not yet exist) of the external computer (PG/PC).

If not enough space is available on drive C: or C: is not a FAT16 drive, you

can also use another local drive (e.g. D:) .

Direct installation from CD is not possible.

4. On an external computer (PG/PC), start the program intersrv.exe under DOS

or under Windows 95 from a DOS prompt. As the parameter, specify the

drive on which the software to be installed is found.

intersrv <drive> (e.g. C:)

The following menu will appear:

This Computer

The PCU must be switched OFF. If the PCU is switched ON, switch it OFF now.

15 SW Installation/Update and Data Backup

15.2 Software installation/update

Other Computer

Alt + F4=Exit