Siemens SINUMERIK 840Di Manual page 467

06.03
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
The following menu will appear:
PLEASE SELECT
1 Install/Update SINUMERIK System
2 SINUMERIK Tools and Options
3 DOS Shell
4 Start Windows NT (Service Mode)
5 SINUMERIK System Check
7 Backup/Restore
8 Start PC Link
9 Reboot (warm restart)
P 840Di Services
Your Choice [1,2,3,4,5,7,8,9,P] ?
2. Choose Install/Update SINUMERIK System using the key "1".
The system prompts you to enter a password:
3. Type one of the passwords of protection levels 0–2.
– System
– Manufacturer
– Service.
Following menu:
PLEASE SELECT MEDIUM:
1 Install from Floppy Disk
2 Install via Serial/Parallel Line
3 Install from Network Drive
5 REBOOT
9 Return to Main Menu
Your Choice [1,2,3,5,9] ?
4. Choose Install from Network Drive using the key "3".
Following menu:
PLEASE SELECT:
1 Connect to Network Drive
2 Show Connected Network Drives
3 Disconnect from all Network Drives
4 Change install directory
5 Install from F:\INSTALL
9 Return to previous Menu
Your Choice [1,2,3,5,9] ?
5. Choose Connect to Network Drive using the key "1".
– Type the user name and the password you want to use for access to
the external computer.
Windows NT 4.0
User name and password of the local user of the PG/PC
15 SW Installation/Update and Data Backup
15.2 Software installation/update
15-467