Siemens SINUMERIK 840Di Manual page 202

6 Turning On and Ramp Up
6.8 License management (SW 2.1 and higher)
License key
SinuCom NC – [[Online]SinuCom_NC_Project : MD block1]
MD-block1
Options: /MD-block1
Options
Channel Mode gro
PROFIBUS assign
Axis configuration
AX1:X1
AX2:Y1
AX4:A1
AX3:Z1
Functions
Fig. 6-4 SinuCom NC: Option menu
6-202
SinuCom NC – [[Online]SinuCom_NC_Project]
Sinumerik – Project objects
Sinumerik 840Di(1) [connected]
Machine data
Fig. 6-3 SinuCom NC: Basic menu
The option menu allows setting of new and additional options in the appropriate
input fields (Fig. 6-4).
The procedure described above (Items 1. to 4.) is triggered with button "Get a
new License Key" (Fig. 6-4). The follow further instructions in the following dia-
log boxes.
Show all Show not licensed only
Option
System software
6FC5251-
Mode group (BAG), additional
6FC5251-0AD00-0AA0
Processing channel, additional
6FC5251-0AA07-0AA0
Cycles in DRAM
Current License Key is not sufficient
Get a new License Key
MD block1
Set Licensed
UNIVERSAL
3 0
3 0
Button: License Key
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03
Machine data
block
Input fields:
Options
J