Siemens SINUMERIK 840Di Manual page 312

10 NC Start-Up with HMI Advanced
10.5 Axes and spindles
Channel axes
Geometry axes
Machine data
Table 10-17 Axis names: Machine data
Number
General ($MN_ ...)
10000 AXCONF_MACHAX_NAME_T AB[n]
Channel-specific ($MC_ ...)
20060 AXCONF_GEOAX_NAME_T AB
20080 AXCONF_CHANAX_NAME_T AB
References
10-312
The machine data
S
MD 20080: AXCONF_CHANAX_NAME_TAB[n] (name of the channel axis
in the channel)
is used to define the channel axis names.
Channel axis names must be unambiguous for the entire channel.
The machine data
S
MD 20060: AXCONF_GEOAX_NAME_TAB[n] (name of the geometry axis
in the channel)
is used to define the geometry axis names.
Geometry axis names must be unambiguous for the entire channel.
The axis names for channel and geometry axes are used in the parts program
for programming general traversing movements or to describe the workpiece
contour. The axis names are used for
S
path axes
S
synchronized axes
S
positioning axes
S
command axes
S
spindles
S
gantry axes
S
coupled-motion axes
S
master value coupling axes.
Identifier
Machine axis name
Geometry axis in the channel
Name of channel axis/special axis in the channel
/FB/ Description of Functions, Basic Machine,
K2 Axes, Coordinate Systems, Frames, Actual-Value System for
Workpiece IWS,
Section: Axes
Name/remarks
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03
Ref.