Siemens SINUMERIK 840Di Manual page 484

15 SW Installation/Update and Data Backup
15.3 Data backup
15-484
7. If you do not wish to save the local backup copies of saved partitions (see
next section) available on the hard disk of the PCU, then choose:
– Backup WITHOUT Local Images using the key "1".
Otherwise, choose:
– Backup WITH Local Images using the key "2".
A message window appears:
– You will be prompted to check whether the connection between the PCU
and the external computer is established.
– The destination path in which the backup copy will be stored on the ex-
ternal computer is displayed.
– Press "Y" to start the backup process.
The actual backup process is now carried out by Norton Ghostt.
The following information is displayed in the message window that opens:
– The progress of the data transfer is displayed.
– The paths are displayed.
– The volume of data to be transferred is displayed.
Size of backup copy with compressing: 4.8GB hard disk –> approx. 330MB
image file.
Time for transfer: approx. 15min.
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03