ABB i-bus KNX Product Manual page 10

®
ABB i-bus KNX
Device technology
Temperature range
Ambient conditions
Design
Installation
Mounting position
Weight
Housing/color
Approvals
CE marking
Device type
TR/A 1.1
* ... = Current version number of the application. Please refer to the software information on our website for this purpose.
Note
ETS and the current version of the device application are required for programming.
The current version of the application is available for download at www.abb.com/knx. After import into
ETS, it is available in ETS under ABB/Timer/Switch.
The device does not support the locking function of a KNX device in ETS. Using a BCU code to block
access to all the project devices has no effect on this device. Data can still be read and programmed.
8 2CDC509082D0201 | TR/A 1.1
Operation
Transport
Storage
Maximum air humidity
Surface mounted device (AP)
Dimensions
Surface mounting; wall mounting with fixing
bracket
Housing cover must face up
0.09 kg
Plastic housing, gray
KNX to EN 50491-3, -5-1, -5-2, -5-3
In accordance with the EMC directive and low
voltage directive
Application Maximum number of
group objects
Time Receiver GPS, SM/...* 40
-30...+55 °C
-30...+55 °C
-30...+55 °C
max. 95% r.h., non-condensing
75 x 90 x 40 mm (H x W x D)
To EN 60 715
Self-extinguishing thermoplastic
Certification
Maximum number of Maximum number of
group addresses assignments
255 255