Parameter Window Light - Threshold 2 - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.14.2 Parameter window Light – Threshold 2
The settings for brightness control threshold 2 are made in this window
the object Sends light above/below threshold 2 – Sending.
Threshold in [lux]
Options:
The switching threshold at which the object Sends light above/below threshold 2 – Sending is to be
switched is sent with this parameter.
Hysteresis in [%]
Options:
The parameter is used to define a hysteresis that must be exceeded or fallen below before the value is
switched over again. This serves to prevent slight fluctuations from constantly switching the value. Setting
the value 0 deactivates the hysteresis.
1 ... 20 ... 220,000
0 ... 25 ... 50
The data entered here influence
.
TR/A 1.1 | 2CDC509082D0201 49