®
ABB i-bus
KNX
Commissioning
3
Commissioning
3.1
Overview
The Time Receiver GPS/1.0 application and Engineering Tool Software ETS 4.2 or later are used to
parameterize the device. The application provides comprehensive and flexible functions for the device.
3.2
Parameters
The ETS Engineering Tool Software is used to parameterize the device. The application is available in
ETS under ABB/Timer/Switch.
This chapter describes the device parameters using the parameter windows. Parameter windows are
structured dynamically so that further parameters are enabled depending on the parameterization and
function of the outputs.
The default values of the parameters are underlined, e.g.:
Options:
Yes
No
TR/A 1.1 | 2CDC509082D0201 13