Parameter Window Light - Threshold 1 - ABB i-bus KNX Product Manual

Time receiver gps, tr/a 1.1

Hide thumbs Also See for i-bus KNX:

Table of Contents

ABB i-bus

KNX

Commissioning

3.2.14.1

Parameter window Light – Threshold 1

The settings for brightness control threshold 1 are made in this window. The data entered here influence

the object Sends light above/below threshold 1 – Sending.

Threshold in [lux]

Options:

The switching threshold at which switchover of the object Sends light above/below threshold 1 – Sending

is to take place is entered with this parameter.

Hysteresis in [%]

Options:

The parameter is used to define a hysteresis that must be exceeded or fallen below before the value is

switched over again. This serves to prevent slight fluctuations from constantly switching the value. Setting

the value 0 deactivates the hysteresis.

1 ... 20 ... 220,000

0 ... 25 ... 50

TR/A 1.1 | 2CDC509082D0201 45

Table of Contents