Parameter Window Time Switch Astro - Settings - ABB i-bus KNX Product Manual

Time receiver gps, tr/a 1.1

Hide thumbs Also See for i-bus KNX:

Table of Contents

ABB i-bus

KNX

Commissioning

Parameter window Time switch Astro – Settings

All settings for time switch Astro are made in this parameter window. Switching times can be activated

following the sunrise and sunset times (function of an astronomical time switch). Depending on the

parameterization, a value (switching bit or scene) is sent on the bus at sunrise and sunset. The sunrise

and sunset times are calculated based on the GPS data (coordinates/date/time). This allows the blinds to

be opened and closed at each sunrise/sunset.

Astro time switch function

Options:

The time switch Astro is enabled with this parameter.

•

Inactive: The time switch Astro is deactivated.

•

Active: The following parameters are displayed. Depending on the reaction parameterized here, switch-

on or switch-off is performed via 1 bit at sunrise (brightness) or sunset (darkness) or the selected

scene number is sent.

32 2CDC509082D0201 | TR/A 1.1

Inactive

Active

Table of Contents