ABB i-bus KNX Product Manual page 73

®
ABB i-bus KNX
Commissioning
23
The group object is enabled if the Switching bit or scene parameter is set to Switching bit in the Time switch Astro – Settings
parameter window.
The object sends its value depending on the set application function for sending on the KNX bus on brightness or darkness.
The object value depends on the Time switch Astro application parameter.
Telegram value:
24
The group object is enabled if the Switching bit or scene parameter is set to Switching bit in the Light – Threshold 1 parameter
window.
The object sends its value when the values set on the Light – Threshold 1 parameter page are exceeded/fallen below.
Telegram value:
25
The group object is enabled if the Switching bit or scene parameter is set to Switching bit in the Light – Threshold 2 parameter
window.
The object sends its value when the values set on the Light – Threshold 2 parameter page are exceeded/fallen below.
Telegram value:
26
The group object is enabled if the Switching bit or scene parameter is set to Switching bit in the Temperature – Temperature
control parameter window.
The object sends its value when the setpoint temperature set on the Temperature – Temperature control parameter page.
Telegram value:
27
The group object is enabled if the Switching bit or scene parameter is set to Scene in the Light – Threshold 1 parameter
window.
The object sends the value parameterized for exceeding the threshold when the threshold is exceeded and the value
parameterized for falling below the threshold when the threshold is fallen below.
Telegram value:
Sending
0 = Darkness/brightness
1 = Brightness/darkness
Sending
0 = Light below threshold
1 = Light above threshold
Sending
0 = Light below threshold
1 = Light above threshold
Sending
0 = Temperature below setpoint temperature
1 = Temperature above setpoint temperature
Sending
0...64 = Scene number
Sends Astro – Sending
Sends light above/below
threshold 1 – Sending
Sends light above/below
threshold 2 – Sending
Sends temperature
above/below setpoint
Sends scene light
above/below threshold 1 –
Sending
1-bit C, W
DPT 1.001
1-bit C, W
DPT 1.001
1-bit C, T
DPT 1.001
1-bit C, T
DPT 1.001
1-byte C, T
DPT 17.001
TR/A 1.1 | 2CDC509082D0201 71