ABB i-bus KNX Product Manual page 63

®
ABB i-bus KNX
Commissioning
Switching bit or scene
Options: Switching bit
Scene
•
Switching bit: The 1-bit object Sends temperature above/below setpoint temperature – Sending
is enabled. The object value changes according to the reaction parameterized in the
Temperature logic parameter.
•
Scene: The 1-byte object Sends scene temperature above/below setpoint temperature –
Sending is enabled. The following parameters are enabled.
Scene number for switching on
Options: 1 ... 64
The scene selected here is sent on switch-on.
Scene number for switching off
Options: 1 ... 64
The scene selected here is sent on switch-off.
TR/A 1.1 | 2CDC509082D0201 61