ABB i-bus KNX Product Manual page 17

®
ABB i-bus KNX
Commissioning
Date/time by receiver or bus value
Options:
This parameter is used to select whether the internal GPS receiver is to be used to control the integrated
time switches or whether the value is to be received externally via the bus.
If the option Bus (external) is selected, the device can no longer send the time values received via GPS
on the bus.
The following parameter appears with the option Receiver (internal):
Receiver (internal)
Bus (external)
Send date and time
Options: Never
On request
On request and automatically/cyclically
•
Never: Sending on the bus is deactivated.
•
On request: The 1-bit object Bus request to send date and time – Reception is activated. When
the "On" value is received on this object, the current time and current date are sent on the bus
via the corresponding objects.
•
On request and automatically/cyclically: The 1-bit object Bus request to send date and time –
Reception is activated. When the "On" value is received on this object, the current time and
current date are sent on the bus via the corresponding objects. The dependent parameter
Cycle interval for date and time is additionally activated.
Cycle interval for date and time
Options: Every 30 seconds
Every minute
Every hour
Every 6 hours
Every 12 hours
At midnight
At 00:02
At DST
Every hour and at DST
Every 6 hours and at DST
Every 12 hours and at DST
At midnight and at DST
At 00:02 and at DST
Depending on the selection, the date and time are correspondingly sent cyclically on the bus.
TR/A 1.1 | 2CDC509082D0201 15