Siemens SIMATIC S5 Manual page 203

Fundamentals of COM 266
Function key menu:
With the exception of <F7>, the function key menu is identical to that on page 1
of this screen form.
<F7> is used to select predefined texts for the following input fields:
• Reference direction
• PLC BCD coded
• Polarity HW limit switch
And what now?
Fill in all input fields.
You have now entered all machine data.
Press <F6> to transfer the machine data to its destination.
"Active" appears briefly on the error line.
Additional function keys in the "INPUT" menu:
You can output any page of the screen form to your printer by press-
ing <F4> (Print Screen function). Before attempting to start a printout, be
sure that you initialized the printer with S5-DOS.
You can screen through all pages with <F1> or <F2>, and make changes if
necessary. You can forward your changes to the data destination while on
any page with <F6>.
Press <F8> when you want to return to the "FUNCTION SELECT" menu. You
must confirm your request to exit with F1.
6-36
IP 266
EWA 4NEB 812 6057-02