Siemens SIMATIC S5 Manual page 227

Fundamentals of COM 266
Field name Type
Tool ref. pt.: O The word "set" appears in this field when mode 5 has executed. The
word "reset" is displayed if there is no reference point.
CLC: O This field shows the controller status.
"On" is displayed in all modes except 3 and 4.
"Off" is displayed in modes 3 and 4.
Teach-Mode: O The word "on" is displayed in this field when a traversing (machining)
program is generated in mode 10. The word "off" appears only when
mode 10 is terminated with mode 11.
Status: O finished:
running:
Mode O In "actual-value display" mode, these fields are static output fields, and
Program are used to display the specified mode and all parameters.
Distance
Override
"Type" column: O = output field
6-60
Description
No mode has been started.
As soon as the zero-speed monitor is tripped during a
traversing movement, the displayed changes from "running"
to "finished".
A mode has been started and is still in progress.
IP 266
EWA 4NEB 812 6057-02