Siemens SIMATIC S5 Manual page 205

Fundamentals of COM 266
Data area:
The entries you make in the upper portion of the data area indicate how you
want to end your printout. The information entered in this area is printed out at
the end of the machine data or traversing (machining) program listing.
Siemens AG
SIMATIC S5
COM 266-IP 266
These items of data
cannot be modified in
any way, and appear at
the same location on all
printouts.
In the lower portion of the data area you will find two fields for initializing the
printer. The fields can be changed only with S5-DOS.
"Lines per page (40-95)":
"Columns per line (80-132)":
6-38
LINEAR AXIS Meier
You can enter arbitrary com-
mentary in this gray-backed in-
put field; the commentary then
appears at this location in the
printout. The information
the last line was taken from the
"PRESETS" form.
The specified number of lines per page is
shown in this field.
The specified number of columns per line is
shown in this field.
DATE:
PAGE:
The current date is output in the
"DATE" field. You can change
the date prior to starting the
printout. The page number is
on output next to the
"PAGE".
EWA 4NEB 812 6057-02
IP 266
word