Siemens SIMATIC S5 Manual page 216

IP 266
And what now?
Enter a traversing (machining) program. Before doing so, select either
DIN mode by pressing <F1>
or
TEXT MODE by pressing <F2>.
Forward the traversing (machining) program to the specified destination
device (FD, PG, IP 266) with <F6>.
Exit the screen form with <F8>. You must confirm your intention to exit by
pressing <F1>.
The "FUNCTION SELECT" menu is displayed.
You have now generated machine data and a traversing (machining) program.
• If you entered your data directly on the IP 266 (target device: IP 266), you can
now invoke the "TEST" function. The description of this function begins in
Section 6.6.
• If you stored your data on the floppy or programmer, you must first forward
it to the IP 266 before continuing. You will find details on how to do so in the
next section.
EWA 4NEB 812 6057-02
Fundamentals of COM 266
6-49