Trunk Access Map Setup - NEC SL 1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Program
Use Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an exten-
sion access options for trunks. For example, an extension can place only outgoing calls on trunks to
14
which it has outgoing access. There are 126 (SL1000) 096 (SL1100) Access Maps with all 126
(SL1000) 096 (SL1100) trunk ports programmed in Map 1 with full access.
An extension can use one of the maps you set up in this program. Use Program 15-06 to assign Trunk
Access Maps to extensions. Each trunk can have one of eight access options for each Access Map.
Emergency calls will override Program 14-07 settings.
Input Data
Item No.
Default
2-108
Downloaded from www.Manualslib.com
Program 14 : Trunk, Basic Setup
Access Map Number
Trunk Port
Number
01 001 ~ 126 0 = No access
(SL1000) 1 = Outgoing access only
001 ~ 096 2 = Incoming access only
(SL1100) 3 = Access only when trunk on Hold
4 = Outgoing access and access when trunk on Hold
5 = Incoming access and access when trunk on Hold
6 = Incoming and Outgoing access
7 = Incoming access, outgoing access and access when trunk on Hold
Access map No.
1
2
:
manuals search engine

14-07 : Trunk Access Map Setup

001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Input Data
Trunk Port No.
1
2
:
126 (SL1000)
096 (SL1100)
1
2
:
126 (SL1000)
096 (SL1100)
1
2
:
126 (SL1000)
096 (SL1100)
Program 14 : Trunk, Basic Setup
ISSUE 1.0
Default
7 (T, R, H)
7 (T, R, H)
:
7 (T, R, H)
0 (No access)
0 (No access)
:
0 (No access)
0 (No access)
0 (No access)
:
0 (No access)