NEC SL 1000 Programming Manual page 142

SL1000/SL1100
Item
No.
15
16
18
Program
21
15
22
23
27
28
29
2-120
Downloaded from www.Manualslib.com
Item
Storage of Caller-ID for an- 0 = Disable (Off)
swered call 1 = Enable (On)
Handsfree Operation 0 = Disable (Off)
Enable or disable an extension 1 = Enable (On)
ability to use the speakerphone
on outside calls. When dis-
abled, users can hear the con-
versation, but cannot respond
handsfree.
Power-Saving Mode 0 = Normal mode
1 = Power-Saving Mode (Eco-Mode)
Virtual Extension Access 0 = DSS
Mode (when idle Virtual Ex- 1 = Outgoing (OTG)
tension key pressed) 2 = Ignore
Determine whether a Virtual
Extension (VE) should function
as a DSS key or a Virtual Ex-
tension. When DSS (0) is se-
lected, the key functions as a
DSS key to the extension and
for incoming calls to that exten-
sion. When Outgoing (1) is se-
lected, the key functions as a
virtual extension and can be
used for incoming and outgoing
calls. When Ignore (2) is se-
lected, the key functions can
receive incoming calls only.
Multiple Incoming From Inter- 0 = Disable
com and Trunk 1 = Enable
If enabled, this affects how a
Hotline key lights, based on the
setting in Program 22-01-01. If
22-01-01 is set to 1 for trunk
priority, the Hotline key lights
solid when a trunk call rings in.
If 22-01-01 is set to 0 for inter-
com priority, the Hotline key
does not light for incoming
trunk calls, but lights solid for
intercom calls. If 15-02-22 is
disabled, Hotline keys light
solid for any incoming calls re-
gardless of the setting in Pro-
gram 22-01-01.
Speed Dial Preview Mode 0 = Preview
This option defines how a 1 = Outgoing Immediately
speed dial key functions when
pressed. If set to Preview (0),
the speed dial number can be
previewed before dialing. If set
to Outgoing Immediate (1), the
number is dialed immediately.
Handset Volume 0 = Back to Default (Back)
Determine how an extension 1 = Stay at previous level (Stay)
handset volume is set after it is
adjusted during a call.
Message Waiting Lamp Color 0 = Green
Determine whether an exten- 1 = Red
sion Message Waiting Lamp
lights Green (0) or Red (1)
when a message is received.
PB Back Tone Level 1 ~ 63 (- 15.5 dB ~ + 15.5 dB)
This program allows adjustment
of the PB Back Tone Level
when you are calling an ISDN
Line.
manuals search engine
Input Data Default
1
1
1
2
1
0
1
0
32 (0 dB)
Program 15 : Extension, Basic Setup
ISSUE 1.0
Related
Note
Program
22-01-01