Speed Dialing Number And Name - NEC SL 1000 Programming Manual

SL1000/SL1100
Level
SB
Description
Use Program 13-04 : Speed Dialing Number and Name to store Speed Dialing data in the Speed
Program
Dialing areas. This program is also used to define the names assigned to the Speed Dialing numbers.
Input Data
13
Item
No.
01
02
03
04
05
06
07
08
09
2-92
Downloaded from www.Manualslib.com
Program 13 : Abbreviated Dialing

13-04 : Speed Dialing Number and Name

Speed Dialing Bin Number
Item
Speed Dialing Data 1 ~ 9, 0,
Assign dial number for 000- key 1), Recall/Flash (Press line
999 bins key 2),
@ = Code to wait for answer su-
pervision in ISDN (Press line key
3)
(Maximum 36 digits)
Name Maximum 12 Characters (Use dial
pad to enter name)
Transfer Mode 0 = Not Used
1 = Internal Dial
2 = Incoming Ring Group (IRG)
3 = Remote Monitor
Transfer Destination Num- If Transfer mode is (Refer to 13-
ber 04-03) :
1 = Internal Dial Mode
1 ~ 9, 0,
(Maximum 36 Characters)
2 = Incoming Ring Group
0 ~ 25 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits when using
ISDN functionality
3 = Remote Monitor
Dial (Up to 4 digits) (SL1000)
Dial (Up to 8 digits) (SL1100)
Incoming Ring Pattern Incoming Ring Pattern
0 = Normal Pattern
1 ~ 4 = Tone Pattern (1 ~ 4)
5 ~ 9 = Scale Pattern (1 ~ 5)
CR/PR feature 0 = Disable
1 = Enable
VRS Message Number 0 ~ 100
Memo1 Maximum 28 digit
Can only be
changed in WebPro
or PCPro.
Memo2 Maximum 28 digit
Can only be
changed in WebPro
or PCPro.
manuals search engine
Input Data Default
, #, Pause (Press line No setting
*
No setting
No setting
, #, P, R, @
*
No setting
No setting
Program 13 : Abbreviated Dialing
ISSUE 1.0
000 ~ 999
Related
Note
Program
0
13-04-03
0 13-04-03
0 14-05
0
15-02-58
15-02-58