NEC SL 1000 Programming Manual page 538

SL1000/SL1100
Alarm
No.
66
67
Program
90
68
Conditions
• The entire terminal that has an Alarm Display setting can be set at Program 90-50-01.
• System Alarm Type is shown despite the setting done at 90-10-01. If multiple Alarm Display Setting
is set, only one highest priority alarm will be shown on a LCD Display.
• The priority level (highest -> lowest) : Alarm 55 > Alarm 7 > Alarm 5 > Alarm 30 > Alarm 8 > Alarm
52> Alarm 29 > Free Demo License Period.
Feature Cross Reference
None
2-516
Downloaded from www.Manualslib.com
Re-
Type Name
port
2 0 SIP exten- More than the num-
sion Li- ber of licenses to
cense which the SIP ex-
Error. tension terminal
was turned on at
0 0 SIP illegal The system re-
Packet re-
ceived
2 0 VoIPDB 1 Provides alert
DSP All when all DSP
Busy Alarm resources are
being used.
2 Used to trouble-
shoot or alerting
when upgrade is
needed.
manuals search engine
Content of
Cause
Alarm
• Wrong number
of licenses.
REGISTER.
A client or network
ceived illegal was illegal state.
packet.
Not enough DSP
resources in sys-
tem.
Program 90 : Maintenance Program
ISSUE 1.0
Action Recovery
1 Confirm the When the
number of li- number of
censes for SIP registration
extension termi- of SIP ex-
nals. tension ter-
2 Check with minals falls
maker on un- below the
certain points. number of
licenses.
Check with maker
on uncertain point,
when happening
frequently when
operating it.
Install VMDB with
more DSP re-
sources.
Alarm
Status
WAR
INF