NEC SL 1000 Programming Manual page 423

ISSUE 1.0
Item
No.
02
Programming Manual
Downloaded from www.Manualslib.com
Item
Override Mailbox Category
(Override MB Ctg)
Use this option to specify the category
of the mailbox where Automated Atten-
dant calls should route when you en-
able Answer Schedule Override.
• If the Override Mailbox is a Sub-
scriber Mailbox, the outside caller
hears the mailbox greeting (if re-
corded) and can leave a message.
• If the Override Mailbox is a Master
Mailbox, the outside caller shears
the recorded announcement. De-
pending on how the Announcement
Mailbox is programmed, InMail
then hangs up, reroutes the call, or
provides additional dialing options.
• If the Override Mailbox is a Rout-
ing Mailbox, the outside caller
hears the instruction menu and can
dial any option allowed by the as-
sociated Dial Action Table.
If any of the Input Data val-
ues are entered, the terminal
displays the Override Mail-
box Number selection
(below).
Override Mailbox Number
(Override MB Num)
Use this option to specify the mailbox
where Automated Attendant calls
should route when you enable Answer
Schedule Override. The mailbox num-
ber you select in this option should
match the mailbox category specified
in 47-11-02 : Override Mailbox Cat-
egory above.
manuals search engine
Input Data Default
0 = Undefined 0
1 = Subscriber Mailbox
- STA
2 = Master Mailbox
3 = Routing Mailbox
Up to 3 digits (using 0 ~ No setting
9)
SL1000/SL1100
Description
Category 0 = Skip Mailbox No.
setting
Category 1 = Mailbox No.
should be 1 ~ 128. refer to
<47-02 : InMail Station Mailbox
Options on page 2-384>
(SL1000)
Category 1 = Mailbox No.
should be 1 ~ 120. refer to
<47-02 : InMail Station Mailbox
Options on page 2-384>
(SL1100)
Category 2 = Mailbox No.
should be 1 ~ 32. refer to
<47-03 : InMail Group Mailbox
Options on page 2-388>
Category 3 = Mailbox No.
should be 1 ~ 32. refer to
<47-07 : InMail Routing Mail-
box Options on page 2-393>
Category 0 = Skip Mailbox No.
setting
Category 1 = Mailbox No.
should be 1 ~ 128. refer to
<47-02 : InMail Station Mailbox
Options on page 2-384>
(SL1000)
Category 1 = Mailbox No.
should be 1 ~ 120. refer to
<47-02 : InMail Station Mailbox
Options on page 2-384>
(SL1100)
Category 2 = Mailbox No.
should be 1 ~ 32. refer to
<47-03 : InMail Group Mailbox
Options on page 2-388>
Category 3 = Mailbox No.
should be 1 ~ 32. refer to
<47-07 : InMail Routing Mail-
box Options on page 2-393>
2-401
Program
47