NEC SL 1000 Programming Manual page 40

SL1000/SL1100
Item
No.
05
06
Program
07
10
08
09
10
11
Conditions
• The system must be reset for these changes to take affect.
Feature Cross Reference
None
2-18
Downloaded from www.Manualslib.com
Item
NIC Interface 0 = Auto Detect
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
Network Ad- 0 = No (Disable)
dress Port 1 = Yes (Enable)
Translation
(NAPT) Router
Setup
NAPT Router IP 0.0.0.0 ~ 126.255.255.254
Address(De- 128.0.0.1 ~ 191.255.255.254
fault Gateway 192.0.0.1 ~ 223.255.255.254
[WAN])
ICMP Redirect 0= NO, Signaling packets will follow the ICMP redirect mes-
sage.
1= YES, Signaling packets will NOT follow the ICMP redirect
message.
IP Address 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Subnet Mask 128.0.0.0
240.0.0.0
254.0.0.0
255.192.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
NIC Setup 0 = Auto Detect
1 = 100 Mbps, Full Duplex
3 = 10 Mbps, Full Duplex
5 = 1 Gbps, Full Duplex
manuals search engine
Input Data
192.0.0.0 224.0.0.0
248.0.0.0 252.0.0.0
255.0.0.0 255.128.0.0
255.224.0.0 255.240.0.0
255.252.0.0 255.254.0.0
255.255.128.0 255.255.192.0
255.255.240.0 255.255.248.0
255.255.254.0 255.255.255.0
255.255.255.192 255.255.255.224
255.255.255.248 255.255.255.252
255.255.255.255
Program 10 : System Configuration Setup
ISSUE 1.0
Default Description
0 NIC Auto Ne-
gotiate
(CPU)
0 If using an ex-
ternal NAPT
Router or not.
0.0.0.0 Set the IP ad-
dress on the
WAN side of
router.
0 When receiv-
ing ICMP redi-
rect message,
this determines
if the IP Rout-
ing Table up-
dates
automatically
or not.
172.16.0.10 Set for
VoIPDB.
255.255.0.0 Set for
VoIPDB.
0 Set for
VoIPDB.