Ip Telephone Terminal Basic Data Setup - NEC SL 1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Use Program 15-05 : IP Telephone Terminal Basic Data Setup to set up the basic settings for an IP
telephone.
Input Data
Item
No.
01
02
04
07
09
15
16
Programming Manual
Downloaded from www.Manualslib.com
Program 15 : Extension, Basic Setup

15-05 : IP Telephone Terminal Basic Data Setup

Extension Number
Item Input Data
Terminal Type 0 = NGT
1 = H.323
2 = SIP
3 = MEGACO
4 = SIP-MLT
IP Phone Fixed MAC address
Port Assign- 00-00-00-00-00-00 ~
ment FF-FF-FF-FF-FF-FF
Nickname Up to 48 characters
Using IP 0.0.0.0 ~
Address 255.255.255.255
Call procedure 0 ~ 65535
port
CODEC Type 1 = Type 1
2 = Type 2
3 = Type 3
4 = Type 4
5 = Type 5
Authentication Up to 24 characters
Password
manuals search engine
Maximum four digits (SL1000)
Maximum eight digits (SL1100)
Default Description
-
00-00-00- MAC Address of reg-
00-00-00 istered SIP MLT
phone is stored
and/or can input the
MAC address of an
SIP MLT phone so
when it comes on-
line it is provided
with the extension in
which the MAC ad-
dress matches.
No setting Nickname section on
Invite message.
Example :
Extension 100 has a
Nickname set to
PAUL.
Extension 101 has
command 15-05-17
set to Nickname.
The inbound call to
extension 101, from
100, shows PAUL.
-
-
1 Assign the CODEC
Type of the SIP MLT.
None Assign the authenti-
cation password for
SIP single line tele-
phones.
SL1000/SL1100
Related
Note
Program
15-05-01
15-05-17
15-05-01
15-05-01
84-24
84-11
15-05-01
15-05-01
2-127
Program
15