NEC SL 1000 Programming Manual page 141

ISSUE 1.0
Item
No.
04
05
06
07
08
10
11
12
13
Programming Manual
Downloaded from www.Manualslib.com
Item
Redial (Speed Dial) Control 0 = Common Abbreviated Dial
Use this option to control the 1 = Group Speed Dialing
function of the extension Redial 2 = Directory Dialing (SL1000)
key when used with Speed Di-
aling. The Redial key can ac-
cess either the Common/
Individual or Group Speed
Dialing numbers.
Transfer Key Operation Mode 0 = Transfer
Use this option to set the oper- 1 = Call back
ating mode of the extension 2 = Hook
Transfer key. The keys can be
for Call Transfer, Serial Calling
or Flash. When selecting the
Flash option (selection 2), refer
also to Program 81-01-14.
Hold Key Operating Mode 0 = Normal (Common)
Use this option to set the func- 1 = Exclusive Hold
tion of the Multiline Hold key. 2 = Park Hold
The Hold key can activate nor-
mal Hold or Exclusive Hold.
Automatic Hold for CO Lines 0 = Hold
When talking on a CO call and 1 = Disconnect (Cut)
another CO line key is pressed,
the original trunk is placed on
Hold (0) or Disconnected (1).
Automatic Handsfree 0 = Preselect
Use this option to set whether 1 = One-Touch (Automatic Handsfree)
pressing a key access a One-
Touch Key or if it preselects the
key.
Ringing Line Preference for 0 = Idle (Off)
Trunk Calls 1 = Ringing (On)
Use this option to select be-
tween Idle and Ringing Line
Preference for trunk calls.
Callback Automatic Answer 0 = Off
Use this option to enable or 1 = On
disable automatic answer of
calls recalling to a station. For
example, if a Transfer Recall or
Hold Recall is ringing back to a
station, the following happens:
If Program 15-02-11 is enabled,
the station will automatically
answer the recall when it goes
off-hook. If Program 15-02-11 is
disabled, a station does not
automatically answer the recall
when it goes off-hook. The user
must first press the line appear-
ance of the recalling call or
press the answer key.
Off-Hook Ringing 0 = Muted Off-Hook Ringing
Use this option to set the tele- 1 = No Off-Hook Ringing
phone Off-hook signaling. Off- 3 = Beep in Speaker (SP)
hook signaling occurs when a 4 = Beep in Handset (HS)
telephone user receives a sec- 5 = Speaker and Handset Beep
ond call while busy on a hand-
set call. To enable/disable Off-
hook signaling for an extension
Class of Service, use Program
20-13-06.
Redial List Mode 0 = ICM/Trunk (Extension/Trunk
Select whether the Redial List Mode)
feature should store internal 1 = Trunk Mode
and external numbers (0), or
only external numbers (1).
manuals search engine
Input Data Default
0
0
0
1
1
1
1
0
0
SL1000/SL1100
Related
Note
Program
2-119
Program
15