Lcr Carrier Table - NEC SL 1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Use Program 26-05 : LCR Carrier Table to define the LCR Access Codes and routing options.
These options include Authorization codes and Cost Center
Input Data
Item No.
01
02
03
04
Conditions
The settings must comply with the requirements of the Indirect Carrier. The operation of the @ symbol
within the Access Code depend on the type of trunk. For analog trunk set as Dial Pulse the @ symbol
defines change to DTMF dialing. For ISDN trunks the @ symbol defines that a Connect Message is
received and then DTMF digits are sent in the B-Channel.
Feature Cross Reference
• LCR-Least Cost Routing
Programming Manual
Downloaded from www.Manualslib.com
Program 26 : ARS Service & Least Cost
Item
Delete Digits
Enter the quantity of leading digits that
need to be deleted
Access Code
Enter the Access Code and Option to
route to the Indirect Carrier
Authorization Code Table
Enter the table number that contains the
correct Authorization code.
Cost Center Code
Optionally enter a cost center code.
manuals search engine

26-05 : LCR Carrier Table

Input Data
0 - 16
Maximum 16 digits
(0 ~ 9, , #, P, @)
*
P = Pause
@ = Change to DTMF or wait for Con-
nect
0 ~ 10
(0 = No Authorization code)
0 = Not Used
1 = Used
SL1000/SL1100
Routing
Program
26
Default
0
No setting
0
0
2-297