Program 26 : Ars Service & Least Cost Routing; Automatic Route Selection (Ars/F-Route) Service - NEC SL 1000 Programming Manual

ISSUE 1.0

26-01 : Automatic Route Selection (ARS/F-Route) Service

Level
IN
Description
Use Program 26-01 : Automatic Route Selection Service (ARS/F-Route) to define the system op-
tions for Automatic Route Selection (ARS/F-Route).
Input Data
Item
No.
01
02
03
04
06
07
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
Programming Manual
Downloaded from www.Manualslib.com
Program 26 : ARS Service & Least Cost
Item
ARS Service
Enable or disable ARS.
Network Outgoing Inter-Digit ARS
Time
With Networking, this time replaces
20-03-04 when determining if all net-
work protocol digits have been re-
ceived. If ARS is enabled at Site B,
this time can be programmed for 5
(500 ms) at Site A. If ARS is disabled
and Site B is using F-Route for out-
bound dialing, this time should be
programmed for 30 (three seconds)
at Site A.
ARS Misdialed Number Handling
If a user dials a number not pro-
grammed in ARS, this option deter-
mines if the system should route over
Trunk Group 1 or play error tone.
LCR Mode Option
Class of Service Match Access
F-Route Access COS Reference
manuals search engine
Input Data Default
0 = Disable (Off) 0
1 = Enable (On)
0 ~ 64800 seconds 30 seconds
0 = Route to Trunk 0
Group 1
1 = Play Warning
Tone to Dialer
0 = UK style 0
1 = Not UK style
0 = Disable (Off) 0
1 = Enable (On)
0 = F-Route 0
1 = ARS
SL1000/SL1100
Routing
Related Pro-
Note
gramming
26-02
26-03
26-04
20-03-04
21-02
26-02
26-05
26-06
26-07
26-08
26-09
26-02
26-02
44-05
2-293
Program
26