Ars/F-Route Table - NEC SL 1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Program
Use Program 44-05 : ARS/F-Route Table to set the ARS/F-Route table. There are four kinds of order.
If the higher priority trunk groups are busy, the next order group is used. If a lower priority route is se-
44
lected, the caller may be notified with a beep tone.
Input Data
Item No.
01
02
03
04
05
06
07
08
09
11
Conditions
None
2-368
Downloaded from www.Manualslib.com
Program 44 : ARS/F-Route Setup
ARS/F-Route Table Number
Priority Number
Item
Trunk Group Number
Select the trunk group number to use for the outgoing
ARS call.
Delete Digits
Enter the number of digits to be deleted from the dialed
number.
Additional Dial Number Table
Enter the table number (defined in Program 44-06) for
additional digits to be dialed.
Beep Tone
Select whether or not a beep is heard if a lower priority
trunk group is used to dial out.
Gain Table Number for Internal Calls
Select the gain table number to use for the internal call
(defined in Program 44-07).
Gain Table Number for Tandem Connections
Select the gain table number to use for the tandem call
(defined in Program 44-07).
ARS Class of Service
Select the ARS Class of Service to use for the table.
An extension ARS COS is determined in Program 26-
04-01.
Dial Treatment
Select the Dial Treatment to use for the table. If a Dial
Treatment is selected, Programs 44-05-02 and 44-
05-03 are ignored and the Dial Treatment defined in
Program 26-03-01 is used instead.
Maximum Digit
Input the maximum number of digits to send when
using the F-Route.
Network Specified Parameter Table
Enter a table number from Program 26-12.
manuals search engine

44-05 : ARS/F-Route Table

001 ~ 100
1 ~ 4
Input Data
0 = No setting
1 ~ 25 = Trunk Group
255 = Extension Call
0 ~ 255
(255 = Delete All)
0 ~ 100
0 = Off
1 = On
0 ~ 100
0 = No setting
0 ~ 100
0 = No setting
0 ~ 16
0 ~ 15
0 ~ 24
0 ~ 16
Program 44 : ARS/F-Route Setup
ISSUE 1.0
Default
0
0
0
0
0
0
0
0
0
0