Class Of Service Options (Incoming Call Service) - NEC SL 1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming call
feature availability for each extension Class of Service (COS).
Input Data
Item
No.
01
02
03
04
05
06
Programming Manual
Downloaded from www.Manualslib.com
Program 20 : System Option Setup

20-09 : Class of Service Options (Incoming Call Service)

Class of Service Number
Item
Second Call for DID/DISA/ 0 = Off
DIL/E&M Override 1 = On
Turns off or on the extension
ability to receive a second
call from a DID, DISA, DIL,
or tie line caller.
With this option set
to 1, the destination
extension must be
busy for a second
DNIS caller to ring
through. If the desti-
nation extension
does not have a
trunk key available
for the second call
and a previous call
is ringing the exten-
sion but has not yet
been answered, the
second caller hears
busy regardless of
this program setting.
Caller ID Display 0 = Off
Turns off or on the Caller ID 1 = On
display at an extension.
Sub Address Identification 0 = Off
Defines whether or not an 1 = On
extension displays the Caller
Sub-Address.
Notification for Incoming 0 = Off
Call List Existence 1 = On
Determines whether or not
an extension display shows
Check List when an incom-
ing call is missed by a user.
Signal/Voice Call 0 = Off
Turn off or on an extension 1 = On
ability to enable Handsfree
Answerback or Forced Inter-
com Ringing for their incom-
ing Intercom calls.
Incoming Time Display 0 = Off
1 = On
manuals search engine
Default
Input Data
COS 01 ~ 15
0
1
0
1
1
1 (SL1000)
0 (SL1100)
SL1000/SL1100
01 ~ 15
Related Pro-
Note
gram
11-11-15
11-11-16
2-169
Program
20